home *** CD-ROM | disk | FTP | other *** search
- Sender: dedwards@scs.unr.edu
-
- Ok. Many people mailed me suggesting I post this list to
- the whole IML. When Imagine 3.0 is available I'll repost
- an updated list.
-
-
- If you have any problems with this modification:
- 1) Don't Blame me for your Guru.
- 2) Send me E-mail with your config (a2000,040,Retina,etc..)
- I'm curoius to see what causes Imagine to fail
- with this modification.
-
-
-
- Ok, here's how it works...
-
- Get a filezapper type program. (NewZap DPU FileZap Hex etc...)
-
- Look up your version of Imagine on the chart below.
- (If your version is not listed, Email me and I'll see if I can
- make one for it.)
-
- Edit the executeable at the bytes indicated in the chart. The block #s and
- byte #s are shown in decimal. The hex numbers in parenthesis are the hex
- versions of the block numbers. The bytes to modify are, of course, in hex.
- Replace the resolution you find there with the resolution you want. Then
- save the new file. (I don't have to remind you to keep a backup of Imagine
- on hand!)
-
- Notice that Imagine automaticly doubles the vertical resolution for use in
- interlace mode. So, if you want vertical resolution of 462 then you must
- tell it to give you 231. (231 = 00E7 in hex)
-
- Imagine Version # Horizontal Vertical
-
- FP 1.1 Block 393 ($189) Block 83 ($053)
- Bytes 220 & 221 Bytes 162 & 163
- From 02 80 From 00 C8
- (Example: To 02 BC = 700 in dec)(To 00 E7 = 231 dec)
-
- FP 2.0 Block 497 ($1F1) Block 95 ($05F)
- Bytes 328 & 329 Bytes 250 & 251
- From 02 80 From 00 C8
-
- INT PAL 2.0 Block 500 ($1F4) Block 94 ($05E)
- Bytes 124 & 125 Bytes 42 & 43
- From 02 80 From 01 00
-
- FP PAL 2.0 Block 497 ($1F1) Block 95 ($05F)
- Bytes 388 & 389 Bytes 244 & 245
- From 02 80 From 01 0
-
- INT 2.9 Block 1561 ($619) Block 119 ($077)
- Bytes 486 & 487 Bytes 480 & 481
- From 02 80 From 00 C8
-
- FP 2.9 Block 1529 ($5F9) Block 95 ($05F)
- Bytes 82 & 83 Bytes 168 & 169
- From 02 80 From 00 C8
-
- FP PAL 2.9 Block 1529 ($5F9) Block 95 ($05F)
- Bytes 146 & 147 Bytes 162 & 163
- From 02 80 From 01 00
-
- Impulse told me, in the past, that Imagine is made to run ONLY on a
- 640 x 400 screen. I was told that if I changed it, I would do so at my own
- peril. I pass this information on to you.
-
- One Final Note: Imagine PC users have a whole different program than Amiga
- users. This modification will not work on the PC version. I would guess
- that a simmilar modification for the PC version would be more complicated,
- given that VGA modes are more complicated than Amiga modes. I would be very
- interested to see someone try though. Imagine Imagineering on a 486DX2/66
- with a 1024 x 768 editor screen. Now imagine Impulse telling you it will
- never happen.
-
- Thanks to Juha Kallioinen of Finland for the PAL numbers.
-
- ____________________________________________________________
- / \
- | Amiga 2000 James R. Walker |
- | 2MB Chip dedwards@unssun.scs.unr.edu |
- | 18MB Fast ______________________________________________|
- | 130 MB Hard / |
- | 68040 33Mhz |Heinlein,Rand,Clarke,Adams,Asimov,Niven,Worley|
- \____________________________________________________________/
-
-